DriSteem Vapor-Logic Guide d'installation télécharger pdf (Page 4)

INTRODUCTION

Figure 4-1: The key pad clearly displays the system

functions of the humidifier.

VAPOR-LOGIC

ACTUAL RH: 35%

Figure 4-2: The VAPOR-LOGIC

key pad is mounted on

the CRU humidifier control cabinet, located near the unit.

Figure 4-4: The STS and LTS humidifiers offer the

flexibility of mounting the VAPOR-LOGIC

key pad on a

control cabinet that is mounted on either the humidifier or

on a wall near the humidifier.

Figure 4-3: The VAPOR-LOGIC

key pad is mounted on

the front of the VAPORMIST cabinet for easy access.

This manual explains the operation of and gives instruc-

tions for the use of the VAPOR-LOGIC

microcontroller.

(See figure 4-1.)

VAPOR-LOGIC

is a custom microprocessor-based

humidifier control system developed to be compatible with

DRI-STEEM single stage humidifiers. (See figures 4-2,

4-3 and 4-4 below.) The versatile software is configured

to meet the needs of humidification system control

variations and to adapt to a multitude of humidifier

applications. The advanced technology of

VAPOR-LOGIC

provides reliable operation while its

simple operating procedures make it easy to use.

VAPOR-LOGIC

features include a self-diagnostic test

during initialization, end of season drain and compatibility

with most control inputs. A full-function integral digital

display/key pad allows you to monitor and adjust humidi-

fier control parameters.

VAPOR-LOGIC

controls single stage humidification

systems with control accuracies to within ±2% RH.

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

DriSteem Vapor-Logic Guide d'installation Page 4