DriSteem Vapor-Logic Guide de dépannage télécharger pdf (Page 69)

%3*45&&.7BQPSMPHJD*OTUBMMBUJPOBOE0QFSBUJPO.BOVBMt1BHF

Operation

To create a backup file:

1. Insert a FAT32-formatted USB flash drive into the USB port on

the Vapor-logic4 board.

2. Go to Diagnostics/USB backup-restore/Back up settings

3. Select Yes. The display will prompt you when backup is

complete.

To restore from a backup file:

1. Insert a FAT32-formatted USB flash drive with that humidifier’s

backup file into the USB port on the Vapor-logic4 board.

2. Go to Diagnostics/USB backup-restore/Restore settings.

3. Select Yes. Note that the serial number of the humidifier and

backup file must match to complete the restore process.

Downloading firmware updates

The Vapor-logic4 controller can be field upgraded to the latest

firmware version via the USB port on the Vapor-logic4 board.

Firmware updates are available for free on the DRI-STEEM

website.

To update your Vapor-logic4 controller to the latest firmware

version, perform the following procedure:

1. Navigate to the Vapor-logic4 page at www.dristeem.com,

or type the following into your browser’s address bar:

www.dristeem.com/products_ControllersAcess_VL4.jsp

2. Click the Firmware updates link on the Vapor-logic4 page.

3. Plug a reliable USB flash drive into a USB port on your

computer, and prepare the flash drive as follows:

a) Move or delete all files from the drive.

b) Make sure it has at least 16 MB of free space.

c) Make sure it is not partitioned into multiple drives.

4. Perform the procedure in Table 66-1.

'JSNXBSFVQEBUFT

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 103 104

Pas de commentaire

DriSteem Vapor-Logic Guide de dépannage Page 69