DriSteem Vapor-Logic Guide d'installation télécharger pdf (Page 5)

DRI-STEEM GTS Humidifier Installation, Operation, and Maintenance Manual • Page 3

Safe operating instructions

1. STOP! Read the safety information on the previous page.

2. Set the humidistat to lowest setting.

3. Turn off all electric power to the appliance.

4. This appliance is equipped with an ignition device that

automatically lights the burner. Do not try to light the burner

by hand.

5. Remove control access panel.

6. Unplug the black power plug on the gas valve (see

Figure 3-1).

7. Wait five minutes to clear out any gas.

If you then smell gas, STOP! Follow “B” in the safety

information on the previous page.

If you don’t smell gas, go to the next step.

8. Plug the black power plug back into the gas valve.

9. Replace control access panel.

10. Turn on all electric power to the appliance.

11. Set humidistat to desired setting.

12. If the appliance will not operate, follow the instructions on this

page titled, “To turn off gas to appliance,” and call your service

technician or gas supplier.

To turn off gas to appliance

1. Set the humidistat to lowest setting.

2. Turn off all electric power to the

appliance if service is to be performed.

3. Remove control access panel.

4. Unplug the black power plug on the gas

valve.

5. Replace control access panel.

S a f e t y p r e c a u t i o n s ( c o n t i n u e d )

Gas

valve

Gas valve

power

plug

Figure 3-1:

Detail of gas valve

More safety precautions are on the next page ▶

Top view

Overview

1 2 3 4 5 6 7 8 9 10 ... 79 80

Pas de commentaire

DriSteem Vapor-Logic Guide d'installation Page 5