DriSteem Vapor-Logic Spécifications télécharger pdf (Page 8)

Page 8 • DRI-STEEM Vapormist humidifier

Vapormist specifications

Table 8-1:

Vapormist capacities, electrical specifications, and weights

Model

Maximum

steam capacity

Current draw (amps) Weights ‡

Single-phase Three-phase Shipping Operating

lbs/hr kg/h 120V 208V* 240V* 277V 480V† 600V† 208V* 240V† 277V 480V† 600V† lbs kg lbs kg

VM-2 6 2.7 16.7 9.6 8.3 7.2 4.2 3.3 —————80369543

VM-4 12 5.4 33.3 19.2 16.7 14.4 8.3 6.7 16.7** 14.4** 12.5 7.2** 5.8** 80 36 95 43

VM-6 18 8.2 — 28.8 25.0 21.7 12.5 10.0 25.0** 21.7** 18.8 10.8** 8.7** 88 40 122 55

VM-8 24 10.9 — 38.5 33.3 28.9 16.7 13.3 33.3** 28.9** 25.0 14.4** 11.5** 88 40 122 55

VM-10 30 13.6 — — 41.7 36.1** 20.8 16.7 29.1** 25.3** 21.9 12.6** 10.1** 93 42 139 63

VM-12 36 16.3 — — — 43.3 25.0 20.0 33.3 28.9 25.0 14.4 11.5 93 42 139 63

VM-14 42 19.1 ————29.2 23.3 38.9 33.7 29.2 16.8 13.5 93 42 139 63

VM-16 48 21.8 ————33.3 26.7 44.4 38.5 33.3 19.2 15.4 93 42 139 63

VM-21 63 28.6 ————43.8 35.0 — — 43.8 25.3 20.2 95 43 152 69

VM-25 75 34.0 —————41.7 — — — 30.1 24.1 95 43 152 69

VM-30 90 40.9 —————————36.1 28.9 101 46 156 71

VM-34 102 46.3 —————————40.9 32.7 101 46 156 71

* On 208V/240V/single-phase/three-wire and on 208V/three-phase/four-wire supplies, the neutral line provides a separate 120V circuit for the SDU fan unit.

** For wire sizing, the highest leg draw is shown due to current imbalance.

† Add the following to Vapormist weights if using an SDU option (these weights are for additional control components housed within the Vapormist cabinet):

– SDU-I: 12 lbs (5.5 kg) (SDU-I shipping weight is 68 lbs [31 kg])

– SDU-E: 9 lbs (4 kg) (SDU-E shipping weight is 61 lbs [28 kg])

‡ Add the following if using the SSR option:

– For single-phase or three-phase models drawing less than 21.7 amps, add 2 lbs (1 kg)

– For three-phase models drawing more than 21.7 amps, add 4 lbs (2 kg)

All Vapormist models operate at 50/60 Hz.

mc_042610_0900

Figure 8-1:

Vapormist clearance recommendations

Top (when SDU is not mounted directly above

the Vapormist): 18"(460 mm)

Right side electrical

controls: 36" (915 mm)

Supporting wall

Front: 36" (915 mm)

Floor: 24" (610 mm)

Left side:

12" (305 mm)

Secured to supporting

wall

To dispersion

assembly

DC-1201

mc_042710_1326

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

DriSteem Vapor-Logic Spécifications Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Déshumidificateurs DriSteem Vapor-Logic