DriSteem Vapor-logic3 Instructions d'exploitation télécharger pdf (Page 28)

Components of the keypad/display

The VAPOR-LOGIC

keypad/display consists of

(see Figure 26-1 below):

• A 128 x 64-pixel backlit LCD display

• A power light

• An alarm light

• Eight keys:

– Four arrow keys

– An Enter key

– Three soft keys

A soft key’s function is determined by the screen

currently displayed.

The arrow keys are used to adjust the values of the

different parameters of the humidifier.

The Enter key is used to make selections on various

screens.

The power light is illuminated whenever power is

applied to the keypad/display.

The alarm light is activated any time a fault condition

is detected.

Keypad/display overview.

Operation

Figure 26-1: VAPOR-LOGIC

3 keypad/display

Operation:

Keypad/display overview

The menu system

The VAPOR-LOGIC

keypad/display software

organizes the control of the humidification system

under six top-level screens:

• Status

• Control Modes

• Alarms

• Set Up

• Diagnostics

• Reports

Each one of these screens is used to view or modify a

different characteristic of the humidifier. To access

any of these screens, activate the Main Menu of the

keypad by depressing the “Main” soft key whenever

it is visible. This will immediately take you to the

Main Menu selection screen, allowing you to choose

where you would like to go next using the up and

down arrow keys followed by the Enter key. The

menu structure is diagramed on the opposite page,

with a brief description of the submenus on the pages

following.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 74 75

Commentaires sur ces manuels

Pas de commentaire

DriSteem Vapor-logic3 Instructions d'exploitation Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Déshumidificateurs DriSteem Vapor-logic3